Do you want to know how to paint over faux painted walls to enhance the beauty of your house? Let me tell you that a faux finish on your walls can add a nice touch to your room, but altering it is not always as easy as painting over it. To achieve appealing results when painting over a faux finish, the surface must be thoroughly prepped and primed.
However, to give your walls texture faux wall finishes use a variety of paints, papers, and other accessories. Maintaining the finish, whether it is a plain parchment-like tint, or embossed features or metallic highlights, will keep the walls looking great for years to come. Care for a faux finished wall is similar to caring for any painted surface, depending on the finish technique and materials employed.
Keep reading my article to learn more about it!!!
Products You Will Need to Paint Over Faux Painted Walls
- Plastic Drop cloths
- Painter’s tape
- Random-orbit sander
- Fine-grit sanding disc
- Shop vacuum
- Safety glasses
- Dust mask
- Spackling compound
- Putty knife
- Fine-grit sandpaper
- All-purpose household cleaner
- Soft-bristled brush
- Trisodium phosphate
- Hand gloves
- Roller applicator
- Paint tray
- Latex or acrylic paint
Paint Over Faux Walls Step by Step Guide
Make the Room Ready
Preparing the room before starting your task is crucial and should be your first priority. Before painting remove furniture from the room and cover it with plastic drop cloths properly. It is essential that plastic drop cloths should be attached to the floor with painter’s tape.
Now it’s time to carefully remove all fixtures, window coverings, switch plates, and outlet covers for hassle-free painting. You will need painter’s tape so you could protect windowsills, baseboards, door hinges, and the ceiling perimeter.
Sand the Interior Walls
Preparing the surface is the most crucial stage to correctly paint over a faux finish, especially if the faux finish has painting over textured paint. In this case, you can use a random-orbit sander, remove the roughness and sand the wall to a smooth finish.
Some people asked how to paint over sponge painted walls? The answer is sanding sponge painted walls and make the wall smooth. At last, you can clean up the dust and vacuum it up. With a bucket of water and one to two capfuls of an all-purpose cleaner, clean painted walls before painting, moldings, and baseboards.
The Walls Should Be Cleaned –
It is very essential for you to dry the wall after wiping it using a solution of an all-purpose household cleaner and water using a sponge.
Ensure that there is no dirt and dust is left otherwise it can easily attach to the paint. Here, you will need to use a soft-bristled brush and a solution of trisodium phosphate (TSP). Also freshwater to remove any difficult stains or mildew if you find in the surface.
You can also painting over glazed walls. For that, you need to follow this step first.
Use a Quality Primer
When changing the color or finish of a room, a good latex primer is necessary for the best results. Priming, as we all know, is similar to painting in that it doesn’t require as much care, but the process is the same. You will need to start with a paintbrush whose bristle is covered with 1″ of primer.
Using it you can easily cover the places where a roller can’t reach, such as corners, molding, and around fixtures. Now prime the main part of the wall using a good-quality roller applicator in 3 to 4′ square areas. Lastly, try to make a series of overlapping W strokes from right to left, then return from left to right for a better results.
You’ll need to know how much paint you need to buy once you’ve decided on the colors to apply. To know the exact amount, you can multiply the length of each surface by its height, after that, add 30% for good measure. As professionals say a gallon of paint will typically cover 400 square feet. You may always utilize the extra for touch-ups if you buy more than you think you’ll need.
It’s time to carefully paint the edges of the doors, windows, trim, and fixtures with a contrasting color. Now apply a zigzag pattern of overlapping W strokes and a roller covered in a paint tray, and paint the significant part of the walls in 3 to 4′ square patches.
You can apply a second layer of paint if you think it is necessary by following the first method. To prevent removing any fresh paint, remove the plastic drop cloths and tarps and take the painter’s tape off at a 45-degree angle.
Tips You Should Need to Follow After Applying Faux Paint
The finish is sealed to protect it from wear and tear and cleaning. If you use a latex glaze instead of flat paint to apply the imitation texture, you will get a more durable result. After applying the faux paint finishes for walls, seal the wall with clear acrylic varnish or beeswax, which is especially important if your faux design includes stenciling or tissue paper. Texturing elements like Venetian plaster and stone-based finishes can be preserved by sealing the wall with a glaze or varnish.
Allowing paint to cure for six weeks ensures that it is totally dry and set and will not be harmed by normal wear and washing. Numerous different materials and various types of paint are used to achieve the finish of many copy patterns, and the curing timeframes of these materials might vary. Wait until the finish has completely dry before leaning or cleaning anything against the wall.
Faux-painted walls, like any other painted surface, require routine cleaning. Abrasive cleaners should not be used on textured or metallic surfaces because most filth can be removed with a non-oily cleanser like mild soap and warm water.
If you use a mild abrasive cleanser or a thin paste of baking soda and water you can easily remove scuff marks. Grease buildup can be removed with ammonia or vinegar. All cleaning solutions should be tested on a hidden area of the wall beforehand to verify that they won’t ruin the faux finish, and severe scrubbing should be avoided.
Touching It Up
A well-done and maintained imitation finish can last a long period, but it will almost probably need occasional touch-ups to retain its appearance. Scratches and gouges can be fixed with paint in complementary hues that are as close as feasible to the design.
If a raised stencil or textured section is badly damaged, sand it smooth and paint over it to match the rest of the wall, or reapply it. Use the same latex glaze or sealer that you used to protect it to blend it in with the rest of the finish.
- In this case, it will be wiser to use TSP according to the manufacturer’s directions because it can corrode metal and damage finished wood. Before beginning the project, put on your safety glasses, protective gear, and rubber gloves.
- Remember that primers and paints can produce hazardous fumes if exposed for an extended period. As a result, you should maintain that the workspace is well-ventilated. To extract or circulate air from outside, open windows or utilize fans.
Can You Faux Paint on Textured Walls?
What Are the Types of Faux Painting Techniques?
Mottling and Old World color washing;
Metals and patinas;
What Kind of Paint Do You Use for Faux Painting?
Final Talk about how to paint over faux painted walls :
To give your wall an extra layer of beauty you can always rely on faux painting. If you get yourself faux painted walls, you can have it for a long period of time with proper maintenance. In this article we tried our best to give the ideas of how to paint over faux painted walls. Hope that helps.